3Com OfficeConnect 3CP4144, Руководство пользователя CLI

Страница: 98 / 144

B-18 A
PPENDIX
B: CLI COMMAND DESCRIPTION
list critical events Displays the last ten critical status events, and the system time when each
occurred. You can change which events are logged as critical, using the set facility
command. The table displays the system, the up time, and the event.
list dns hosts
Displays the DNS Local Host name and its IP address, which you configured using
the
add dns host .
list dns servers
Displays DNS Name Servers, which you configured using the add dns server
command. The domain name and the server address are listed for each DNS
server.
list facilities
Displays the system facilities (processes) currently running, plus the default log
level. The log level is the severity of error that facility will produce syslog entries for.
You can change the log level using the
set facility loglevel command.
list filters Displays all the filter names in the filter table, which you previously defined using
the
add filter command. You can remove filters using delete filter . The command
lists the filter file name, the status of the filter, and the protocols the file applies to.
For example:
Filter Name Status Protocols
easyfilter.fil NORMAL IP IP-RIP
list files Displays the files currently stored in the FLASH file system. You can remove files
using
delete file , but you can add them using TFTP only.
list interfaces Displays the installed interfaces, along with their operational status, administration
status, and interface index. If an interface is down, you can use
enable interface to
try to bring it up. The command lists:
■
Index - number used to identify the interfaces position in the table
■
Name - interface name: eth:1, DA:1 or loopback
■
Oper Status - current, operating status of interface; UP or DOWN
■
Admin Status - administrative status you designated interface to be, up or
down. If it doesn’t match Oper Status, a problem exists with the interface.
list ip addresses
Displays the IP address for each interface. It lists:
■
Address - IP address of the interface
■
Bcast Algo - broadcast algorithm used
■
Reassembly Max Size - maximum allowable size of packet that can be
reassembled from a fragmented packet
■
Interface - interface this IP address uses to connect to the system
list ip arp
Displays the contents of the ARP cache. It lists:
■
IP Address - IP address for this entry
■
Phys Address - MAC address that the IP address maps to