3Com OfficeConnect 3CP4144, Руководство пользователя CLI

Страница: 111 / 144

CLI Commands B-31
set ppp
receive_authentication
[NONE | PAP | CHAP |
EITHER]
Sets the type of inbound authentication to be used when establishing PPP
connections. See RFC 1334 for details about CHAP and PAP.
Options:
set ppp echo_retries
<number>
Sets the number of PPP echo request retries that will be attempted before
declaring a PPP link down. When set to a non-zero value, PPP echo requests will
periodically be sent on all active PPP links. If a <number> consecutive PPP echo
responses are not received, the PPP link will be declared down. The maximum
<number> of PPP echo retries is 10. When set to 0 (the default), no PPP echo
requests will be sent - the feature is disabled.
set snmp community
<community_name>
■
address [IP_address]
■
access [RO | RW]
Modifies parameters for an SNMP authorized user. The community name and IP
address of SNMP requests from managers on the network must match the list,
which you can see using
list snmp communities .
set system
■
name [“name”]
■
location [“location”]
■
contact [“contact info”]
server_type Type of network service you wish to assign to this administration
name. Currently available services are:
TELNETD - TELNET server
HTML - for gathering statistics
SNMPD - SNMP agent
TFTPD - server for file transfers
socket Indicates which “socket” the server listens on. For TFTP and
TELNET, it is the TCP or UDP port number.
data TELNET Ancillary Data. This field contains server-specific
configuration data. See table which lists the configurable
ancillary
data parameters.
close_active_connections Indicates whether or not to close any active connections when a
service is disabled by the
disable network_service command.
Parameters Description
NONE Don’t check
PAP Use Password Authentication Protocol
CHAP Use Challenge Handshake Authorization Protocol
EITHER Use whichever type of authentication is requested
Parameters Description
<community_name> Group designation authorizing SNMP requests.
address IP address of the SNMP manager, in the form nnn.nnn.nnn.nnn
access Determines what type of access to SNMP MIBs the added user will
have. Options are Read Only (RO) and Read Write (RW).