3Com OfficeConnect 3CP4144, Руководство пользователя CLI

Страница: 133 / 144

TELNET Commands B-53
TELNET
TELNET commands are available to users who dial in, and whose type is network
(type parameter in add user ), whose host_type is prompt (host_type parameter in
set login user ), and whose login_service is TELNET (login_service parameter in set
login user ).
telnet
<ip_name_or_addr>
Establishes a TELNET client session with the specified IP host name or address. In
order for the system to resolve the host name, you must either add the host name
and address to the DNS local host table, or define a DNS server.
telnet
<ip_name_or_addr>
TCP_port <number>
Establishes a TELNET client session with the specified IP host name or address
using the specified TCP port number. It works just like the TELNET command,
except you also specify the TCP port number to be used. The default TCP port
number is 23.
VERIFY
verify filter
<filter_name>
Verifies the syntax of a filter file, which has been previously add ed to the table. If
you update a filter file and TFTP it to the FLASH file system, and the file already
exists in the filter table, then you use this command to verify the files syntax. You
can use
list filters to see which files are currently in the filter file table, and what
the status of each is.
TELNET
Commands
The following commands are available to TELNET users. They are accessed by
pressing control - ].
close Closes the active TELNET connection.
help Lists the available commands
send <string> Transmits a TELNET control character. Be sure the parameters are uppercase . The
choices are:
set_escape <string>
Allows changing the TELNET escape character from ^] to something else. Control
characters are specified using the carat character followed by another character.
Parameters Description
AYT Are you there
IP Interrupt process
BRK Break
AO abort output
EC erase character
EL erase line
GA go ahead
NOP no - operation
EOR end of record
SYNC synch