3Com OfficeConnect 3CP4144, Руководство пользователя CLI

Страница: 88 / 144

B-8 A
PPENDIX
B: CLI COMMAND DESCRIPTION
add network service
<service_name> Status
■
server_type [server_type]
■
socket [socket_number]
■
enabled [YES]
■
data [“string”]
■
close_active_connections [TRUE | FALSE]
This configures a network listener process that provides a certain type of service.
To see the available server types, use
list services .
The table below shows configurable parameters for TELNET services, which are
specified with the data parameter.
Add network service example:
To configure a TELNET service to offer CLI access on port 23, doing authentication
upon connect:
add network_service CLI_access server_type TELNETD socket 23
Parameters Description
<service_name> Name of this type of service. Limit of 32 character ASCII string.
server_type Designates the type of server:
HTTP
SNMPD - SNMP agent
TFTPD - server for file transfers
TELNETD - TELNET server to the CLI
socket Indicates which “socket” the server listens on. For TFTP and TELNET, it is the
TCP or UDP port #.
enabled This indicates whether the network service is enabled. Enter YES or NO .
data Ancillary Data. This field contains server-specific configuration data. See the
table on the next page for settable ancillary data parameters for TELNET.
close_active_
connections
Indicates whether or not to close any active connections when a service is
disabled by the
disable network_service command. Default: FALSE .
Ancillary Data
Parameters Description
auth On indicates that login/password authentication should be performed on
incoming connections.
Default:
on .
Format: auth=[on/off]
login_prompt ASCII string specifying the login prompt to be sent during authentication.
It must be quoted.
Default:
“
login : “
Format: login_prompt=[string]
login_banner ASCII string sent to a client when the connection is made. It must be
quoted. Default: none.
Format: login_banner=[string]