3Com CoreBuilder 9000, Руководство пользователя

Страница: 108 / 468

108 C
HAPTER
5: C
ONFIGURING THE
P
LATFORM
Set Loop Mode Set the loop mode of selected port as None, Loop Forward, or Loop Back.
You are prompted to specify a port and a mode.
Command Actions
Command Result
Example
Enter
1 5 5 1.1.2 1
The following message is displayed:
Setting loop mode has completed successfully.
The loop mode of port 1.1.2 is set to loop back.
Enter the menu sequence:
(1) SYS: Platform Configuration
(5) IFC: Interface Cards
(5) SLM: Set Loop Mode
Enter a parameter at the prompt
Parameter Format or Range
Port Number <slot.group.port> (
0.0
- For all)
Loop Mode
0
for No loop
1
for Loop back
2
for Loop forward
Direct access sequence:
1 5 5
[parameters]
System action taken: The loop mode of the selected port on the interface
module is set and saved.
System message display:
Setting loop mode has completed
successfully.