3Com CoreBuilder 9000, Руководство пользователя

Страница: 193 / 468

Signaling Setup 193
Update Signaling
Protocol Version
Update the signaling protocol version of the ports of the
CoreBuilder 9000 ATM Enterprise Switch and save it to flash.
Command Actions
Command Result
Example
Enter:
1 1 4 5 4 3.1.2 1
The following prompt is displayed:
This operation will release all connections of the specified
port(s)!
Are you sure (Y/N)? Y
Enter
Y
to confirm,
N
to cancel.
The following message is displayed:
Signaling Protocol Version was successfully set.
The signaling protocol version for port 3.1.2 is updated to 3.1 and saved.
Enter the menu sequence:
(1) SYS: Platform configuration
(1) SET: Switch setup
(4) SIG: Signaling setup
(5) SPS: Signaling protocol
configuration setup
(4) SPV
:
Set protocol version
Enter a parameter at the prompt
Parameter Format or Range
Port number <slot.group.port>; Enter
0.0
for all ports
Protocol version
0
for version 3.0
1
for version 3.1
Confirmation
Y
or
N
Direct access sequence:
1 1 4 5 4
[parameters]
System action taken: The signaling protocol version is updated for the
specified port.
System message display:
Signaling Protocol Version was
successfully set.