3Com CoreBuilder 9000, Руководство пользователя

Страница: 105 / 468

Configuring Interface Modules 105
Enable Interface Enable interface module port. You are prompted to specify a port.
Command Actions
Command Result
Example
Enter:
1 5 2 1.1.2
The following message is displayed:
Setting port state command has completed successfully.
Port 2 of the selected ATM Interface Module is enabled.
Enter the menu sequence:
(1) SYS: Platform Configuration
(5) IFC: Interface Cards
(2) EIF: Enable Interface
Enter a parameter at the prompt
Parameter Format or Range
Port ID <slot.group.port>
Port State
0
- disable
1
- enable
Direct access sequence:
1 5 2
[parameters]
System action taken:
The selected port on the interface module is enabled.
System message display:
Setting port state command has
completed successfully.