3Com CoreBuilder 9000, Руководство пользователя

Страница: 85 / 468

Setting the Port Network Connection Type 85
Reset NNI
Configuration
Reset the NNI configuration parameters for the CoreBuilder 9000 ATM
Enterprise Switch to their factory default settings. The default setting is
UNI for all ports, and 7 for maximum number of hops.
Command Actions
Command Result
Example
Enter:
1 1 3 5
The following prompt is displayed:
Do you really want to reset config? [y/n]
Enter
y
to confirm. The following message is displayed:
NNI configuration was set to defaults.
The NNI configuration parameters are reset to UNI for all ports.
Enter the menu sequence:
(1) SYS: Platform Configuration
(1) SET: Switch Setup
(3) NNI: NNI Setup
(5) NNI: Set NNI configuration to
factory defaults
Direct access sequence:
1 1 3 5
System action taken:
The NNI configuration parameters are reset to their
factory default values.
System message display:
NNI configuration was set to defaults.