3Com CoreBuilder 9000, Руководство пользователя

Страница: 106 / 468

106 C
HAPTER
5: C
ONFIGURING THE
P
LATFORM
Set Port Frame Mode Set the interface mode of the selected port as SDH or SONET and save to
flash memory. You are prompted to specify a port and a mode.
Command Actions
Command Result
When setting the port frame mode on one of the ports of the OC-3 card,
all four ports are automatically updated, even if only one port was
selected.
Example
Enter:
1 5 3 5.1.1 0
The following messages are displayed:
The following settings will take place:
Changing port <5.1.1> setting from SONET mode to SDH mode.
Changing port <5.1.2> setting from SONET mode to SDH mode.
Changing port <5.1.3> setting from SONET mode to SDH mode.
Changing port <5.1.4> setting from SONET mode to SDH mode.
Do you really want to do these changes? (Y/N)?
Enter
y
to confirm. The following message is displayed:
Setting port frame mode has completed successfully.
Enter the menu sequence:
(1) SYS: Platform Configuration
(5) IFC: Interface Cards
(3) SFM: Set Port Frame Mode
Enter a parameter at the prompt
Parameter Format or Range
Port ID <slot.group.port> (
0.0
- For all)
Frame Mode
0
- SDH
1
- SONET
Direct access sequence:
1 5 3
[parameters]
System action taken: The frame mode of the selected port on the interface
module is set and saved.
System message display:
Setting port frame mode has completed
successfully.