3Com CoreBuilder 9000, Руководство пользователя

Страница: 148 / 468

148 C
HAPTER
6: M
ANAGING
N
ETWORK
I
NTERFACES
Reset NNI
Configuration
Reset the NNI configuration parameters for the CoreBuilder 9000 ATM
Enterprise Switch to their factory default settings. The default setting is
UNI for all ports, and 7 for maximum number of hops.
The reset takes place after the next reboot.
Command Actions
Command Result
Example
Enter:
1 1 3 5
The following prompt is displayed:
Do you really want to reset config? [y/n]
Enter
y
to confirm. The following message is displayed:
NNI configuration was set to defaults.
The NNI configuration parameters are reset to UNI for all ports.
Enter the menu sequence:
(1) SYS: Platform Configuration
(1) SET: Switch Setup
(3) NNI: NNI Setup
(5) NNI: Set NNI configuration to
factory defaults
Direct access sequence:
1 1 3 5
System action taken: The NNI configuration parameters are reset to their
factory default values.
System message display:
NNI configuration was set to defaults.