3Com 2928 - Baseline Plus Switch PWR, Руководство пользователя

Страница: 46 / 505

1-4
Table 1-2
Configuration items of global parameters
Item Description
Private Net IP
Mask
Configure a private IP address pool for the stack.
The master device of a stack must be configured with a private IP address
pool to ensure that it can automatically allocate an available IP address to a
slave device when the device joints the stack.
When you configure a private IP address pool for a stack, the number of IP
addresses in the address pool needs to be equal to or greater than the
number of devices to be added to the stack. Otherwise, some devices may
not be able to join the stack automatically for lack of private IP addresses.
Build Stack
Enable the device to establish a stack.
After you enable the device to establish a stack, the device becomes the
master device of the stack and automatically adds the devices connected to
its stack ports to the stack.
You can delete a stack only on the master device of the stack. The Global
Settings area on a slave device is grayed out.
Return to
Stack configuration task list .
Configuring Stack Ports
Select
IRF
from the navigation tree to enter the page shown in Figure 1-2 . You can configure stack ports
in the
Port Settings
area.
z
Select the check box before a port name, and click
Enable
to configure the port as a stack port.
z
Select the check box before a port name, and click
Disable
to configure the port as a non-stack
port.
Return to Stack configuration task list .
Displaying Topology Summary of a Stack
Select
IRF
from the navigation tree and click the
Topology Summary
tab to enter the page shown in
Figure 1-3 .
Figure 1-3
Topology summary
Table 1-3 describes the fields of topology summary.