3Com 2928 - Baseline Plus Switch PWR, Руководство пользователя

Страница: 153 / 505

1-12
Figure 1-15
Traps configuration
Figure 1-16
Add a target host of SNMP traps
Table 1-8 describes the configuration items for adding a target host of SNMP traps.
Table 1-8
Configuration items for adding a target host
Item Description
Destination IP
Address
Set the destination IP address.
Select the IP address type: IPv4 or IPv6, and then type the corresponding IP
address in the text box according to the IP address type.
Security Name
Set the security name, which can be an SNMPv1 community name, an
SNMPv2c community name, or an SNMPv3 user name.
UDP Port Set UDP port number.
Security Model
Select the security model, that is, the SNMP version. Ensure that the SNMP
version is the same with that on the NMS; otherwise, the NMS cannot receive
any trap.
Security Level
Set the authentication and privacy mode for SNMP traps when the security
model is selected as
v3
. The available security levels are: no authentication no
privacy, authentication but no privacy, and authentication and privacy.
When the security model is selected as
v1
or
v2c
, the security level is no
authentication no privacy, and cannot be modified.