3Com 2928 - Baseline Plus Switch PWR, Руководство пользователя

Страница: 338 / 505

1-3
Trace Route Operation
z
The Web interface supports trace route on IPv4 addresses only.
z
Before performing the trace route operation on the Web interface, on the device execute the
commands of
ip ttl-expires enable
and
ip unreachables enable
to enable the sending of ICMP
timeout and destination unreachable packets.
Select
Network
>
Diagnostic Tools
from the navigation tree and then select the
Trace Route
to enter
the Trace Route configuration page, as shown in Figure 1-3 .
Figure 1-3
Trace Route configuration page
Type the destination IP address in the
Trace Route
text box, and click
Start
to execute the
trace route
command. You will see the result in the
Result
area, as shown in Figure 1-4 .
Figure 1-4
Trace route operation result