1010music nanobox razzmatazz, Руководство пользователя

Страница: 39 / 89

P. 39 of 89
nanobox | razzmatazz User Manual
Oct 14, 2022
CONFIGURE EFFECT SENDS FOR THE LINE INPUT
When you connect an audio signal to the Line Input, that signal is also routed
through the effects engine. You can configure the line input settings on the
Nanobox Configuration screen, described below. Here, you can adjust the gain and
the FX Sends. You can also choose to use a mono or stereo signal for the Line In
here.
The Input Gain controls the level of the signal used overall. The main voice is then
added to the signal sent to FX3. The Input FX1 and Input FX2 parameters control the
sends of the Line Input signal to the respective FX engines.
FX1
FX3 Limiter
FX2
+ +
Out
Pads
1 - 8
and
Line
Input
FX VOICE ARCHITECTURE
After the processing is completed for each individual pad and the line input, the FX
sends for each are sent to FX1 and FX2. The Voice Output is then combined with the
output of FX1, and the result is sent to FX3, the cabinet distortion. The output of FX3
is then combined with the output of FX2 and sent to the Limiter, controlled on the
Nanobox Configuration screen. The result is then sent to the line output.
The diagram below shows the signal flow for the effects. We will cover the voice
architecture for the pads later when we talk about Sound Design with the Pad
Dashboard. You can control the FX sends for the Line Input on the Nanobox
Configuration screen.