1010music nanobox razzmatazz, Руководство пользователя

Страница: 21 / 89

P. 21 of 89
nanobox | razzmatazz User Manual
Oct 14, 2022
Knob Description
PITCH Adjust the pitch in a range of +/- 2 octaves. This is not quantized
to semitones. See the FM Oscillators’ Fixed Pitch parameter and
the WAV’s Pitch Semi parameter to adjust the sound by
semitones. The Detune parameter of the FM Oscillators and the
WAV can be used to move the sound away from the exact
semitone value. See the discussion about Pad Pitch below for
more information.
The Pitch knob will be disabled when there are no sound sources
that can be tuned via pitch. FM Oscillators with a waveform of
Noise cannot be pitch adjusted.
DECAY Dial down the Envelope 1 decay to get quick drum hits. Dial it up
to elongate the sound.
BEND The Bend controls how much the pitch changes over the
duration controlled by the Time knob. Negative values adjust the
pitch lower. Positive values adjust the pitch higher.
TIME Controls the span of time over which the pitch bend occurs.
SNAP Controls the snap level, or loudness of the initial click sound. This
only works if the DFX Snap Type is set to something other than
None on the Drum FX screen.
OS/WA Adjust the relative balance of the FM Oscillators and the WAV
sound source. Turn left to hear more of the FM Oscillators. Turn
right for more of the WAV.
FILTR for
Clips and
Slicers
Apply a high pass (to the left) or low pass (to the right) filter to a
Clip or Slicer pad.
FILTR for all
other models
The Filt 1 cutoff. This knob will be disabled if Filter 1 is OFF. See
the section on Filters below to learn how to enable the filter.
DIST Add DFX distortion to get a grittier sound.
HOLD Adjust the Envelope 1 Hold to control how long the sound will be
held.
RES The Filter 1 Resonance amount to control the shape of the
frequency response near the cutoff frequency. The RES knob will
be disabled when Filter 1 is OFF.
Common Macro Controls
Here are the settings you will find on the Macro Controls screen.