1010music Bitbox Micro 1.0.7 Скачать руководство пользователя страница 8

Страница: 8 / 88

SET UP BITBOX MICRO IN YOUR EURORACK

Let’s get the module in your rack so you can try things out as we cover them here:

Insert the microSD card into the MICRO SD
slot, notched edge to the right.

Turn off your Eurorack and use the ribbon
cable to connect the module to power:

- The narrow connector attaches to the
module, with the red side of the cable on the
side of the header with a white bar.

- The wide connector attaches to the Eurorack
+12V power supply, with the red side of the
cable aligned with pin 1 or the -12V pins on the
power supply bus.

Mount the module into the rack and then power
it up.

After boot up, the bitbox micro displays the Pads screen with a grid of WAV files loaded
from one of the presets provided on the microSD card.

Connect Inputs and Outputs

Connect some basic signals to bitbox micro to get
started. This module has 8 input and 8 output jacks that
support the following connections:

■ Inputs 1 – 2:

Gate, CV, Clock, Audio

■ Inputs 3 – 8:

Gate, CV, Clock

■ Outputs 1 – 6: Assignable audio

■ Outputs 7 – 8: Master audio left and right

Connect Outputs 7 and 8 to speakers or headphones
through a mixer. To record audio, connect an audio signal
to Inputs 1 and 2.

A gate signal on an input can trigger the corresponding
pad. Connect a standard eurorack gate signal to input 3
to try this out.

Page 8 of 88

Bitbox Micro User Manual 1.0.7

Содержание Bitbox Micro 1.0.7

























































































Результаты поиска

Содержание Bitbox Micro 1.0.7

Отзывы:

Бренды по названию

Популярные бренды

1010music Bitbox Micro 1.0.7, Руководство пользователя

Результаты поиска

Содержание Bitbox Micro 1.0.7

Отзывы:

Бренды по названию

Популярные бренды