To Manually Create or Remove Slices:
1.
On the Waveform screen for the slicer pad
touch the menu item with the three dots “. . .”.
This will display the Waveform Slicing menu.
2.
Use touch gestures to move the waveform so
the fixed cursor position (the vertical white line)
is at the position where you want to add
another slice point. Touch Split to create a slice
point. The slice point is shown as a pink
horizontal line with a small pink square near
the bottom.
Waveform Slicing Menu
In addition to setting parameters for a slicer pad, you also need to create the slices.
There are three ways to do this: manually, auto scan, and slice to grid. When you
configure slices manually, you use the Split and Join menu options to and remove splits.
The manual process may also be used to refine the results after you use auto scan or
slice to grid. When you use auto scan, bitbox micro uses an internal algorithm to decide
where to place the splits. You can control the sensitivity of the algorithm. When you use
slice to grid, you define a fixed number of slices and bitbox micro will create splits that
evenly divide the WAV file into the specified number of slices.
Page 35 of 88
Copyright 1010music LLC 2020
Bitbox Micro User Manual 1.0.7
3.
Use touch gestures to move the waveform so the fixed cursor position (the
vertical white line) is on or near a slice point that you want to remove. Touch
Join to remove the slice point.
You can have as many or as few slices as you want.
To Use Auto Scan to Create Slices:
1.
From the Waveform screen for the slicer pad,
touch the menu item with the three dots “. . .”.
This will display the Waveform Slicing menu.
2.
Touch
Scan
and then use a control knob to
select a
Threshold
percentage for the
sensitivity of the scan. The lower the threshold,
the higher the number of slices that will be
created. Touch
OK
when you are ready to
scan. (You can touch anyplace outside of the
Threshold field to cancel the scan.) Bitbox
micro will detect and create slice points in the
file automatically. The slice points are shown
as pink horizontal lines with a small pink
square near the bottom.
Waveform Slicing
Threshold
