ZyXEL Communications ZYAIR, User Manual

Page: 192 / 402

ZyAIR Wireless Gateway Series User’s Guide
Maintenance 16-3
The following table describes the labels in this screen.
Table 16-2 System Status: Show Statistics
LABEL DESCRIPTION
Port This is the LAN or WAN port.
Status This shows the port speed and duplex setting if you are using Ethernet encapsulation for
the Ethernet port.
This shows the transmission speed only for wireless port.
TxPkts This is the number of transmitted packets on this port.
RxPkts This is the number of received packets on this port.
Collisions This is the number of collisions on this port.
Tx B/s This shows the transmission speed in bytes per second on this port.
Rx B/s This shows the reception speed in bytes per second on this port.
Up Time This is the total amount of time the line has been up.
System Up Time This is the total time the ZyAIR has been on.
Poll Interval Enter the time interval for refreshing statistics.
Set Interval Click this button to apply the new poll interval you entered above.
Stop Click this button to stop refreshing statistics.
16.3 DHCP Table Screen
DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual clients to obtain
TCP/IP configuration at start-up from a server. You can configure the ZyAIR as a DHCP server or disable it.
When configured as a server, the ZyAIR provides the TCP/IP configuration for the clients. If set to
None ,
DHCP service will be disabled and you must have another DHCP server on your LAN, or else the computer
must be manually configured.
Click
MAINTENANCE and then DHCP TABLE . Read-only information here relates to your DHCP status.
The DHCP table shows current DHCP client information (including IP Address , Host Name and MAC
Address ) of all network clients using the DHCP server.