![background image](http://html1.mh-extra.com/html/zyxel-communications/zyair/zyair_user-manual_943565234.webp)
ZyAIR Wireless Gateway Series User’s Guide
Internet Access
20-3
Table 20-2 Menu 4 Internet Access Setup
FIELD DESCRIPTION
EXAMPLE
Service Type This field is available if you select the
Ethernet
encapsulation.
Press [SPACE BAR] to select the service type then press [ENTER].
Choose a RoadRunner flavor if your ISP is using Time Warner's
RoadRunner; otherwise choose
Standard
. The
User Name
,
Password
and
Login Server
fields are not applicable (N/A) for the
latter.
Choose from
Standard
,
Telstra
(RoadRunner Telstra or BigPond
authentication method),
RR-Manager
(RoadRunner Manager
authentication method) or
RR-Toshiba
(RoadRunner Toshiba
authentication method).
Standard
My Login Configure the
My Login
and
My Password
fields for PPP and
PPPoE encapsulation only. Enter the login name exactly as your
ISP gives you.
N/A
My Password Enter the password associated with the login name above.
N/A
Login Server Enter the IP address of the login server in dotted decimal notation.
10.11.12.13
IP Address
Assignment
Press [
SPACE BAR
] and then [ENTER] to select
Static
or
Dynamic
address assignment.
Static
IP Address Enter the IP address supplied by your ISP if applicable.
10.11.12.20
IP Subnet Mask Your ZyAIR will automatically calculate the subnet mask based on
the IP address that you entered. Unless you are implementing
subnetting, use the subnet mask computed by the ZyAIR.
Gateway IP
Address
Type the IP address of the gateway. The gateway is an immediate
neighbor of your ZyAIR that will forward the packet to the
destination. On the LAN, the gateway must be a router on the same
segment as your ZyAIR.
Network Address
Translation
Press [
SPACE BAR
] and then [ENTER] to select
None
,
SUA Only
or
Full
Feature
. Please see the
NAT Chapter
for more details.
SUA Only
When you have completed this menu, press [
ENTER
] at the prompt “Press ENTER to Confirm…” to save
your configuration, or press [
ESC
] at any time to cancel.
If all your settings are correct your ZyAIR should connect automatically to the Internet. If the connection
fails, note the error message that you receive on the screen and take the appropriate troubleshooting steps.
Refer to the
System Security
chapter for the wireless LAN security setup.
Summary of Contents for ZYAIR
