ZyAIR Wireless Gateway Series User’s Guide
7-12
Wireless Security
Table 7-3 Wireless LAN: 802.1x
LABEL DESCRIPTION
Authentication
Databases
This field is activated only when you select
Authentication Required
in the
Wireless
Port Control
field.
The authentication database contains wireless station login information. The local
user database is the built-in database on the ZyAIR. The RADIUS is an external
server. Use this drop-down list box to select which database the ZyAIR should use
(first) to authenticate a wireless station.
Before you specify the priority, make sure you have set up the corresponding
database correctly first.
Select
Local User Database Only
to have the ZyAIR just check the built-in user
database on the ZyAIR for a wireless station's username and password.
Select
RADIUS Only
to have the ZyAIR just check the user database on the
specified RADIUS server for a wireless station's username and password.
Select
Local first, then RADIUS
to have the ZyAIR first check the user database on
the ZyAIR for a wireless station's username and password. If the user name is not
found, the ZyAIR then checks the user database on the specified RADIUS server.
Select
RADIUS first, then Local
to have the ZyAIR first check the user database on
the specified RADIUS server for a wireless station's username and password. If the
ZyAIR cannot reach the RADIUS server, the ZyAIR then checks the local user
database on the ZyAIR. When the user name is not found or password does not
match in the RADIUS server, the ZyAIR will not check the local user database and
the authentication fails.
Dynamic WEP
Key Exchange
This field is activated only when you select
Authentication Required
in the
Wireless
Port Control
field. Also set the
Authentication Databases
field to
RADIUS Only
.
Local user database may not be used.
Select
Disable
to allow wireless stations to communicate with the access points
without using dynamic WEP key exchange.
Select
64-bit WEP
or
128-bit WEP
to enable data encryption.
Up to 32 stations can access the ZyAIR when you configure dynamic WEP key
exchange.
Apply
Click
Apply
to save your changes back to the ZyAIR.
Reset
Click
Reset
to reload the previous configuration for this screen.
Summary of Contents for ZYAIR
