ZyXEL Communications ZYAIR, User Manual, Page: 232 / 402

ZyAIR Wireless Gateway Series User’s Guide
Internet Access 20-1
Chapter 20
Internet Access
This chapter describes how to configure the ZyAIR for Internet Access.
20.1 Internet Access Configuration
Menu 4 allows you to enter the Internet Access information in one screen. Menu 4 is actually a simplified
setup for one of the remote nodes that you can access in menu 11. Before you configure your ZyAIR for
Internet access, you need to collect your Internet account information from your ISP and telephone
company.
Use the following table to record your Internet Account Information. Note that if you are using PPP or
PPPoE encapsulation, then the only ISP information you need is a login name and password.
Table 20-1 Internet Account Information
FIELD DESCRIPTION YOUR INFORMATION
System Name Enter the name of the ZyAIR (optional).
Service Name
(PPPoE) Enter the PPPoE service name if the ISP
supplies one. Enter “any” if the ISP does not
assign you one.
Encapsulation Select Ethernet , PPPoE or PPTP
My Login Enter the login name assigned by your ISP (for
PPP/PPPoE only).
My Password Enter the password associated with your ISP
assigned
My Login (for PPP/PPPoE only).
Idle Timeout
(PPPoE or
PPP) Enter the time lapse, in seconds, before you
automatically disconnect from the PPPoE or PPP
server.
IP Address Enter if your IP address is not dynamically
assigned.
Network
Address
Translation Select Full Feature , SUA Only or None .