ZyXEL Communications ZYAIR, User Manual

Page: 45 / 402

ZyAIR Wireless Gateway Series User’s Guide
Wizard Setup 3-5
Table 3-2 Wizard 2: Wireless LAN Setup
LABEL DESCRIPTION
WEP
Encryption
Select Disable allows all wireless computers to communicate with the access points without
any data encryption.
Select 64-bit WEP or 128-bit WEP to allow data encryption.
ASCII Select this option in order to enter ASCII characters as the WEP keys.
HEX Select this option to enter hexadecimal characters as the WEP keys.
The preceding “0x” is entered automatically.
Key 1 to Key 4
The WEP keys are used to encrypt data. Both the ZyAIR and the wireless stations must use
the same WEP key for data transmission.
If you chose 64-bit WEP , then enter any 5 ASCII characters or 10 hexadecimal characters
("0-9", "A-F").
If you chose
128-bit WEP , then enter 13 ASCII characters or 26 hexadecimal characters
("0-9", "A-F").
You must configure all four keys, but only one key can be activated at any one time. The
default key is key 1.
Next Click Next to continue.
Back Click Back to return to the previous screen.
Refer to the chapter on wireless LAN for more information.
3.4 Wizard Setup: ISP Parameters
The ZyAIR offers three choices of encapsulation. They are Ethernet , PPTP or PPPoE. The screen varies
depending upon the type chosen.
3.4.1 Ethernet
Choose Ethernet when the WAN port is used as a regular Ethernet.