ZyXEL Communications Zyair B-1000 v.2, User Manual

Page: 66 / 237

ZyAIR Access Point Series User’s Guide
5-16 Wireless Configuration and Roaming
To enable roaming on your ZyAIR, click the WIRELESS link under ADVANCED and then the Roaming
tab. The screen appears as shown.
Figure 5-12 Roaming
The following table describes the labels in this screen.
Table 5-5 Roaming
LABEL DESCRIPTION
Active Select Yes from the drop-down list box to enable roaming on the ZyAIR if you have two or
more ZyAIRs on the same subnet.
All APs on the same subnet and the wireless stations must have the
same ESSID to allow roaming.
Port # Enter the port number to communicate roaming information between access points. The port
number must be the same on all access points. The default is
16290 . Make sure this port is
not used by other services.
Apply Click Apply to save your changes back to the ZyAIR.
Reset Click Reset to begin configuring this screen afresh.