ZyXEL Communications Zyair B-1000 v.2, User Manual

Page: 231 / 237

ZyAIR Access Point Series User’s Guide
Log Description K-3
Chart K-2 ICMP Notes
TYPE CODE DESCRIPTION
13 Timestamp
0 Timestamp request message
14 Timestamp Reply
0 Timestamp reply message
15 Information Request
0 Information request message
16 Information Reply
0 Information reply message
Chart K-3 Sys log
LOG MESSAGE DESCRIPTION
Mon dd hr:mm:ss hostname
src="<srcIP:srcPort>"
dst="<dstIP:dstPort>"
msg="<msg>" note="<note>"
This message is sent by the "RAS" when this syslog is
generated. The messages and notes are defined in this
appendix’s other charts.
Log Commands
Go to the command interpreter interface (the Command Interpreter Appendix explains how to access and
use the commands).
Configuring What You Want the ZyAIR to Log
Use the
sys logs load
command to load the log setting buffer that allows you to configure which logs
the ZyAIR is to record.
Use
sys logs category
followed by a log category and a parameter to decide what to record