ZyXEL Communications Zyair B-1000 v.2, User Manual

Page: 143 / 237

ZyAIR Access Point Series User’s Guide
LAN Setup 13-5
Table 13-2 Menu 3.5 Wireless LAN Setup
FIELD DESCRIPTION EXMAPLE
Block Intra-BSS
Traffic Press [SPACE BAR] to select Yes or No and press [ENTER].
Number of
Association
Stations Enter the number of association stations. The number should be from 1 to
32.
Breathing LED Press [SPACE BAR] to select Yes or No and press [ENTER].
Output Power Press [SPACE BAR] to select 11dBm , 13dBm , 15dBm or 17dBm and
press [ENTER].
17dBm
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to
cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.
13.3.1 Configuring MAC Address Filter
Your ZyAIR checks the MAC address of the wireless station device against a list of allowed or denied
MAC addresses. However, intruders could fake allowed MAC addresses so MAC-based authentication is
less secure than EAP authentication.
Follow the steps below to create the MAC address table on your ZyAIR.
Step 1. From the main menu, enter 3 to open Menu 3 – LAN Setup .
Step 2. Enter 5 to display Menu 3.5 – Wireless LAN Setup .