manualshive.com logo in svg

ZyXEL Communications VSG1435-B101 - V1.10, Manual

The ZyXEL Communications VSG1435-B101 - V1.10 Manual is now available for free download at manualshive.com. This comprehensive user manual provides detailed instructions on how to set up and maximize the potential of your ZyXEL VSG1435-B101. Get your hands on this invaluable resource today and unleash the full potential of your device.

Share
Download
background image

Appendix F Open Software Announcements

VSG1435-B101 Series User’s Guide

398

places the Program under this License may add an explicit geographical 
distribution limitation excluding those countries, so that distribution is permitted 
only in or among countries not thus excluded. In such case, this License 
incorporates the limitation as if written in the body of this License.

9. The Free Software Foundation may publish revised and/or new versions of the 
General Public License from time to time. Such new versions will be similar in 
spirit to the present version, but may differ in detail to address new problems or 
concerns. Each version is given a distinguishing version number. If the Program 
specifies a version number of this License which applies to it and "any later 
version", you have the option of following the terms and conditions either of that 
version or of any later version published by the Free Software Foundation. If the 
Program does not specify a version number of this License, you may choose any 
version ever published by the Free Software Foundation.

10. If you wish to incorporate parts of the Program into other free programs 
whose distribution conditions are different, write to the author to ask for 
permission. For software which is copyrighted by the Free Software Foundation, 
write to the Free Software Foundation; we sometimes make exceptions for this. 
Our decision will be guided by the two goals of preserving the free status of all 
derivatives of our free software and of promoting the sharing and reuse of 
software generally.

NO WARRANTY

11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO 
WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. 
EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/
OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF 
ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, 
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A 
PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND 
PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE 
DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR 
CORRECTION.

12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN 
WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY 
MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE 
LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL 
OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE 
THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING 
RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR 
A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN 
IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF 
SUCH DAMAGES. 

Summary of Contents for VSG1435-B101 - V1.10





























































































































































































































































































































































































































Reviews:

No comments

Related manuals for VSG1435-B101 - V1.10

PAC 512 Quick Start Manual preview
512
Brand: PAC Pages: 20
National Instruments NI WSN C Series Getting Started Manual preview
NI WSN C Series
Brand: National Instruments Pages: 16
Diehl IZAR IoT GATEWAY Compact Installation Manual preview
IZAR IoT GATEWAY Compact
Brand: Diehl Pages: 4
Technicolor - Thomson DCW615 User Manual preview
DCW615
Brand: Technicolor - Thomson Pages: 52
Juniper SRX 3400 Getting Started Manual preview
SRX 3400
Brand: Juniper Pages: 26
tiko Energy Solutions GM-01.0005R06 User Manual preview
GM-01.0005R06
Brand: tiko Energy Solutions Pages: 40
Eyedro E5B-M-GW Quick Start Manual preview
E5B-M-GW
Brand: Eyedro Pages: 2
Packet Media hypermedia Quick Start Manual preview
hypermedia
Brand: Packet Media Pages: 7
Technicolor TG789vac v2 Installation Manual preview
TG789vac v2
Brand: Technicolor Pages: 39
Eelectron IC00P01DAL Operating Instructions Manual preview
IC00P01DAL
Brand: Eelectron Pages: 9
ICP Global Pty DIP1000 Installation And User Manual preview
DIP1000
Brand: ICP Global Pty Pages: 5
RTA 460BSPBS-N70PB Product User Manual preview
460BSPBS-N70PB
Brand: RTA Pages: 80
SMARTGATE 2N User Manual preview
2N
Brand: SMARTGATE Pages: 48
Aartesys EasyGateway EG400-HE Operating Instructions Manual preview
EasyGateway EG400-HE
Brand: Aartesys Pages: 28
Daikin intelligent Touch Manager BACnet DCM014A51 Quick User Manual preview
intelligent Touch Manager BACnet DCM014A51
Brand: Daikin Pages: 14
Moxa Technologies MGate EIP3170 Quick Installation Manual preview
MGate EIP3170
Brand: Moxa Technologies Pages: 6
Oki BV1250 Technical Reference preview
BV1250
Brand: Oki Pages: 198
ZiFiSense APZT-UI01 Manual preview
APZT-UI01
Brand: ZiFiSense Pages: 11

Brands by name

Popular brands

Load more brands