ZyXEL Communications VSG1435-B101 - V1.10, Manual

Page: 135 / 412

Chapter 8 Home Networking
VSG1435-B101 Series User’s Guide
135
The following table describes the fields in this screen.
Table 24 Network Settings > Home Networking > LAN Setup
LABEL DESCRIPTION
Group Name Select the interface group name for which you want to configure LAN
settings. See
Chapter 15 on page 215 for how to create a new
interface group.
LAN IP Setup
IP Address
Enter the LAN IP address you want to assign to your ZyXEL Device in
dotted decimal notation, for example, 192.168.1.1 (factory default).
Subnet Mask Type the subnet mask of your network in dotted decimal notation, for
example 255.255.255.0 (factory default). Your ZyXEL Device
automatically computes the subnet mask based on the IP Address you
enter, so do not change this field unless you are instructed to do so.
DHCP Server State
DHCP
Select Enable to have the ZyXEL Device act as a DHCP server or DHCP
relay agent.
Select Disable to stop the DHCP server on the ZyXEL Device.
Select DHCP Relay to have the ZyXEL Device forward DHCP request
to the DHCP server.
DHCP Relay
Server Address This field is only available when you select DHCP Relay in the DHCP
field.
IP Address Enter the IP address of the actual remote DHCP server in this field.
IP Addressing
Values This field is only available when you select Enable in the DHCP field.
Beginning IP
Address This field specifies the first of the contiguous addresses in the IP
address pool.
Ending IP
Address This field specifies the last of the contiguous addresses in the IP
address pool.
DHCP Server
Lease Time This is the period of time DHCP-assigned addresses is used. DHCP
automatically assigns IP addresses to clients when they log in. DHCP
centralizes IP address management on central computers that run the
DHCP server program. DHCP leases addresses, for a period of time,
which means that past addresses are “recycled” and made available
for future reassignment to other systems.
This field is only available when you select Enable in the DHCP field.
Days/Hours/
Minutes Enter the lease time of the DHCP server.
DNS Values This field is only available when you select Enable in the DHCP field.
DNS Select the type of service that you are registered for from your
Dynamic DNS service provider.
Select Dynamic if you have the Dynamic DNS service.
Select Static if you have the Static DNS service.
DNS Server 1
DNS Server 2
Enter the first and second DNS (Domain Name System) server IP
address the ZyXEL Device passes to the DHCP clients.