manualshive.com logo in svg

ZyXEL Communications VMG1312-T10C, User Manual

The ZyXEL Communications VMG1312-T10C is a high-performance networking device that supports various DSL technologies. It enables users to easily set up and configure their network connections. For a seamless user experience, a free and downloadable user manual is available on manualshive.com, providing comprehensive guidance and instructions.

Share
Download
background image

Chapter 5 WAN Setup

VMG1312-T10C User’s Guide

52

5.5  WAN Technical Reference

This section provides some technical background information about the topics covered in this 
chapter.

5.5.1  Encapsulation

Be sure to use the encapsulation method required by your ISP. The Device supports the following 
methods.

5.5.1.1  ENET ENCAP

The Device only implements the MAC Encapsulated Routing Link Protocol (ENET ENCAP) with the IP 
network protocol. IP packets get routed between the Ethernet interface and the WAN interface and 
then formatted to work in a bridged environment. For instance, it encapsulates routed Ethernet 

Dial String

Enter the phone number (dial string) used to dial up a connection to your service 
provider’s base station. Your ISP should provide the phone number.

For example, *99# is the dial string to establish a GPRS or 3G connection in Taiwan.

APN Code

Enter the APN (Access Point Name) provided by your service provider. Connections with 
different APNs may provide different services (such as Internet access or MMS (Multi-
Media Messaging Service)) and charge method.

You can enter up to 31 ASCII printable characters. Spaces are allowed.

Obtain an IP 
Address 
Automatically

Select this option If your ISP did not assign you a fixed IP address. 

Use the following 
static IP address

Select this option If the ISP assigned a fixed IP address. 

IP Address

Enter your WAN IP address in this field if you selected 

Use the following static IP 

address

. 

Obtain DNS info 
dynamically  

Select this to have the Device get the DNS server addresses from the ISP automatically. 

Use the following 
static DNS IP 
address

Select this to have the Device use the DNS server addresses you configure manually.

Primary DNS 

server

Enter the first DNS server address assigned by the ISP.

Secondary DNS 

server

Enter the second DNS server address assigned by the ISP.

 Connection

Select 

Nailed-UP 

if you do not want the connection to time out.

Select 

On-Demand

 if  you do not want the connection up all the time and specify an 

idle time-out in the 

Max Idle Timeout 

field.

Max Idle Timeout 

This value specifies the time in minutes that elapses before the Device automatically 
disconnects from the ISP.

Apply

Click 

Apply

 to save your changes back to the Device.

Cancel

Click 

Cancel

 to return to the previous configuration.

Table 8   

Network Setting > Broadband > 3G Backup (continued)

LABEL

DESCRIPTION

Summary of Contents for VMG1312-T10C















































































































































































































































Reviews:

No comments

Related manuals for VMG1312-T10C

2N SmartGate Quick Start preview
SmartGate
Brand: 2N Pages: 2
KE2 SmartGate Installation And Setup preview
SmartGate
Brand: KE2 Pages: 16
2Wire HomePortal Installation And Support Manual preview
HomePortal
Brand: 2Wire Pages: 14
HMS Networks Ewon Flexy 205 Application Note preview
Ewon Flexy 205
Brand: HMS Networks Pages: 20
ZyXEL Communications P-870H Series Quick Start Manual preview
P-870H Series
Brand: ZyXEL Communications Pages: 12
Juniper SSG5 Getting Started Manual preview
SSG5
Brand: Juniper Pages: 2
Foxconn IOTGW-TIX01 User Manual preview
IOTGW-TIX01
Brand: Foxconn Pages: 14
Matrix Telecom SIMADO GFX44 Quick Start Manual preview
SIMADO GFX44
Brand: Matrix Telecom Pages: 32
THOMSON SpeedTouch 716 User Manual preview
SpeedTouch 716
Brand: THOMSON Pages: 110
Sigfox SMK Access Station Mini Installation Manual preview
SMK Access Station Mini
Brand: Sigfox Pages: 17
Miromico LoRaWAN FMLR PicoCell Quick Start Manual preview
LoRaWAN FMLR PicoCell
Brand: Miromico Pages: 8
Qiagen QIAsphere Base Installation Manual preview
QIAsphere Base
Brand: Qiagen Pages: 22
ABB DG/S 1.1 Product Manual preview
DG/S 1.1
Brand: ABB Pages: 111
ABB ARR600 User Manual preview
ARR600
Brand: ABB Pages: 72
ABB MicroSCADA Pro SYS 600C Product Manual preview
MicroSCADA Pro SYS 600C
Brand: ABB Pages: 42
ABB Ability ATT-VZN SIM card ready gateway Installation Manual preview
Ability ATT-VZN SIM card ready gateway
Brand: ABB Pages: 16
ABB Ekip E-Hub Manual preview
Ekip E-Hub
Brand: ABB Pages: 41
ABB M2302 Manual preview
M2302
Brand: ABB Pages: 280

Brands by name

Popular brands

Load more brands