Prestige 724 G.SHDSL CSU/DSU
Hardware Installation and Initial Setup
2-11
client, select the same
Standard Mode
that the server side selects. ANSI and ETSI create recommendations
and standards for the telecommunications industry.
Figure 2-10 Menu 2
—
WAN Setup
Table 2-5 Menu 2
—
WAN Setup Description
FIELD
DESCRIPTION
EXAMPLE
Service Type
Press [SPACE BAR] and press [ENTER] to select
Server
(COE) if your Prestige is acting as a server; select
Client
(CPE) if your Prestige is acting as a client.
Client
Rate Adaption
Press [SPACE BAR] to select
Enable
(activate) or
Disable
(deactivate).
When set to
Enable
, your Prestige will auto-detect the
optimal single Transfer Rate for your DSL line that falls
between the specified
Transfer Max Rate
and
Transfer
Min Rate
fields.
When set to
Disable
, the
Transfer Max Rate
field
becomes your transfer rate.
Disable
(default)
Transfer Max Rate (Kbps)
Change the default values in this field, ONLY at the
request of your service provider. The Prestige supports
the following symmetrical multi-rate data transmission
speeds: 144, 200, 208, 272, 392, 400, 528, 776, 784,
1040, 1160, 1168, 1544, 1552, 1736, 2064, 2312 and
2320Kbps.
Press [SPACE BAR] to select a
Transfer Max Rate
greater than or equal to the
Transfer Min Rate
and press
[ENTER] to continue.
2320K
(default)
Transfer Min Rate (Kbps)
Change the default values in this field, ONLY at the
request of your service provider. The Prestige supports
the following symmetrical multi-rate data transmission
speeds: 144, 200, 208, 272, 392, 400, 528, 776, 784,
144K
(default)
Menu 2 - WAN Setup
Service Type: Client
Rate Adaption= Disable
Transfer Max Rate(Kbps)= 2320K
Transfer Min Rate(Kbps)= 144K
Standard Mode= ETSI (ANNEX_B)
Press ENTER to Confirm or ESC to Cancel:
Summary of Contents for Prestige 724
