ZyXEL Communications Prestige 724, User Manual

Page: 54 / 87

Prestige 724 G.SHDSL CSU/DSU
5-4 Firmware and Configuration File Maintenance
5.2.3 Example of FTP Commands from the DOS Prompt
Figure 5-2 FTP Session Example
5.2.4 Third Party FTP Clients
The following table describes some of the commands that you may see in third party FTP clients.
Table 5-2 General Commands for Third Party FTP Clients
COMMAND DESCRIPTION
Host Address Enter the address of the host server.
Login Type Anonymous.
This is when a user I.D. and password is automatically supplied to the
server for anonymous access. Anonymous logins will work only if your
NSP or service administrator has enabled this option.
Normal.
The server requires a unique User ID and Password to login.
Transfer Type Transfer files in either ASCII (plain text format) or in binary mode.
Initial Remote Directory Specify the default remote directory (path).
Initial Local Directory Specify the default local directory (path).
5.2.5 TFTP and FTP over WAN Will Not Work When
•
Telnet service is disabled.
•
A filter is applied to block Telnet service.
•
There is a SMT console session running.
331 Enter PASS command
Password:
230 Logged in
ftp> bin
200 Type I OK
ftp> get rom-0 zyxel.rom
200 Port command okay
150 Opening data connection for STOR ras
226 File received OK
ftp: 16384 bytes sent in 1.10Seconds 297.89Kbytes/sec.
ftp> quit