ZyXEL Communications Prestige 724, User Manual

Page: 41 / 87

Prestige 724 G.SHDSL CSU/DSU
Channel Setup 3-7
Menu 11.1 — Fields Used To Configure Remote Management
Table 3-4 Menu 11.1 — Description of Fields Used To Configure Remote Management
FIELD DESCRIPTION EXAMPLE
Encapsulation Press [SPACE BAR] and select PPP to configure remote
management. The Prestige will acquire the WAN IP address from the
PPP server. The remote management channel you select cannot be
used for data transfer. To configure a channel for data transfer, refer
to
section 3.3.
PPP
VPI Enter the VPI (Virtual Path Identifier) that your NSP gives you. The
range of the VPI is 0-255. 8
(default)
VCI Enter the VCI (Virtual Channel Identifier) that your NSP gives you.
The range of the VPI is 32-65535. 35
(default)
Outgoing:
My Login Enter the login name that your NSP gives you. This field may contain
up to 31 characters. Trailing spaces are truncated. mylogin
My Password Enter the password that your NSP gives you. It should be associated
with the
My Login field above. This field may contain up to 31
characters. Trailing spaces are truncated.
mypassword
When you have completed this menu, press [ENTER] at the prompt “Press [ENTER] to confirm or [ESC]
to cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.
After you save your configuration you can return to menu 11 to display the channel you selected for remote
management, as shown next.
Menu 11.1 - Channel Profile
Channel Name= Remote
Active= Yes
Encapsulation= PPP
Outgoing: VPI= 8
My Login= mylogin VCI= 35
My Password= ******** DLCI= N/A