ZyXEL Communications Prestige 2000W, User Manual

Page: 70 / 81

Prestige 2000W User’s Guide
Administrator-specific Settings 12-1
Chapter 12
Administrator-specific Settings
This chapter details the administrator-accessible settings on the Prestige. Only edit these settings if you understand the
technology involved.
12.1 Outbound Proxy Configuration
The outbound proxy server is the address and port that your Prestige uses to connect to a SIP server, where there may be
NAT routers that do not support the SIP protocol. If your ISP gave you an outbound proxy server address and port then
enter them here.
If they did not give you the details of an outbound proxy server, then type the SIP Proxy
Server settings as in the next screen ( see section 11.6 ).
Type the URL or IP address of your Outbound Proxy Server if your ITSP gave you one.
Use the following instructions to set up your Prestige to connect to the outbound proxy server.
Figure 12-1 Outbound Proxy Configuration