ZyXEL Communications Prestige 2000W, User Manual

Page: 16 / 81

Prestige 2000W User’s Guide
Introducing the Prestige 1-3
1.2.4 Auto-provisioning
Auto-provisioning automatically updates your Prestige’s configurable settings via a TFTP server.
1.2.5 Software Upgrades
Use the Web Configurator to upload updated software to your Prestige.
1.2.6 NAT Traversal
NAT services typically blocks some services offered by the SIP protocol. Since there are many implementations of
NAT it is impossible to bypass them all. However your Prestige supports communication via an outbound proxy server.
When properly configured, it does not matter if your NAT server supports SIP pass-through or not.
1.3 Required Information
You should have a wireless Internet account already set up and have been given most of the following information.
INTERNET ACCOUNT CHECKLIST
Wireless Settings:
ESSID: ___________________
(default: Wireless)
Network Mode: Ad Hoc Infrastructure (default)
Channel: __________________ (default 6)
WEP Keys (if your wireless network uses WEP encryption)
Key 1: ____________________ Key 2: ____________________
Key 3: ____________________ Key 2: ____________________
Network Mode (also known as encapsulation):
DHCP
Fixed IP
(default)
Your IP Address : __________________
(default: 192.168.1.3)
Subnet Mask: __________________
(default 255.255.255.0)
Gateway IP address: ____________
(default: 192.168.1.1)
PPPoE PPPoE Name: ____________ PPPoE Password: ____________
You should also have a VoIP account already set up and have been given most of the following information.
VOICE OVER IP CHECKLIST
Proxy Server Information
URL/IP Address: __________________ Port: __________________
Expire Time: ______ seconds (default: 3600)