ZyXEL Communications Prestige 2000W, User Manual

Page: 72 / 81

Prestige 2000W User’s Guide
Administrator-specific Settings 12-3
Table 12-2 SIP Configuration
LABEL DESCRIPTION
SIP Configuration
SIP URL Type the SIP telephone number assigned to your Prestige by your ITSP then the
corresponding telephone IP address or URL, and finally a port number with which
to make a telephone connection.
Note that a URL can be used or domain name can be used instead of an IP
address. Your incoming server supplies the rest of the address.
Expire Time Type the time in seconds that the Prestige will wait before sending a Keep-Alive
signal to the SIP-Server. Your VoIP provider should determine this setting.
OPTIONS Interval Timer The OPTIONS Interval Timer periodically sends a signal to the SIP Proxy Server to
maintain the connection.
Type a time in minutes to send a KeepAlive signal to the SIP Proxy Server. The
default is 0, which disables this feature.
Registrar Username Type in the username as supplied by your VoIP provider to access the SIP-Server.
Registrar Password Type in the password to associate with the username above.
Display Name Type a name to interoperate with other SIP devices. It is recommend to leave the
default setting for this field.
Registration Status This displays either Registered or Not Registered depending on the success of
your Prestige’s connection to the SIP-Server.
SUBMIT Click SUBMIT to have the Prestige update to your new settings.
CANCEL Click this button to begin configuring this screen afresh.
RESTART Click this button to restart the Prestige and have your configuration changes take
affect.
12.3 DSP Setting
Use this screen to configure the way your prestige handles telephone connections and codes voice-data.