ZyXEL Communications Prestige 2000W, User Manual

Page: 66 / 81

Prestige 2000W User’s Guide
User Access to the Prestige 11-11
Table 11-8 Wireless Setting
LABEL DESCRIPTION
WEP If you are using a public AP, select None .
Select an encryption level of 64bits or 128bits according to the encryption settings
at your AP site.
Your AP provider should have given you an encryption key if required at the time
you applied for the account.
Key 1 ~ 4 The WEP keys are used to encrypt data. Both the Prestige and the AP must use
the same WEP key for transmission.
If you chose 64-bit WEP , then enter any 10 hexadecimal characters ("0-9", "A-F").
If you chose 128-bit WEP , then enter 26 hexadecimal characters ("0-9", "A-F").
You must configure all four keys, but only one key can be activated at any one
time. The default key is Key 1 .
Default Key Choose from the available WEP keys. Unless advised to do so by your VoIP
provider, leave the default key as Key 1
SUBMIT Click SUBMIT to have the Prestige update to your new settings.
CANCEL Click CANCEL to begin configuring this screen afresh.
RESTART Click this button to restart the Prestige and have your configuration changes take
affect.
SAVE Click this button to save your changes without restarting the Prestige. Your
wireless LAN, Internet and SIP settings changes do not take affect until you use
RESTART.
11.9 System
Use this screen to set up user and admin accounts and corresponding passwords, and configure the time zone settings of
your Prestige.