ZyXEL Communications Prestige 2000W, User Manual

Page: 21 / 81

Prestige 2000W User’s Guide
2-2 Keypad and Front Panel
Call Use this key to make and receive calls.
Numerical
Keypad
Use these keys to enter numbers and characters.
Hold down a key to automatically dial a predefined number (refer to Chapter 9 Using Speed Dial ).
2.1 Turning the Prestige On and Off
Press and hold the Off key for approximately 2 seconds to turn the Prestige on or off.
2.2 Load Default IP
While the Prestige is switched off:
1. Hold down Call key then press the Off key.
2. A message displays (below) indicating the Prestige has returned to the default IP address (see the Internet
Account Checklist in Required Information for the default IP address).
Load Default IP
<<Release Key!>>
Figure 2-2 Load Default IP
2.3 Switching the Key-lock On and Off
The keys lock automatically if the Prestige is in standby mode for more than one minute.
Press and hold the # key on the numerical keypad for approximately 2 seconds to lock or unlock the keypad.
2.4 Adjusting the Speaker Volume
Increase the volume during a call by pressing the right arrow key.
Decrease the volume during a call by pressing left arrow key.
Figure 2-3 Speaker Volume
12:00
12 ) ) ) ) ) ) ) ) ) )
123456
This is the Prestige’s speaker
volume, which displays during a call
if you use the left or right arrow keys.