Prestige 650HW ADSL Router
Remote Node Configuration
4-9
Table 4-2 Remote Node Network Layer Options
FIELD DESCRIPTITON
EXAMPLE
When you have completed this menu, press [ENTER] at the prompt “Press [ENTER] to confirm or [ESC]
to cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.
4.3 Remote
Node
Filter
Move the cursor to the
Edit Filter Sets
field in menu 11.1, then press
[SPACE BAR]
to select
Yes
. Press
[ENTER]
to display
Menu 11.5 – Remote Node Filter
.
Use
Menu 11.5 – Remote Node Filter
to specify the filter set(s) to apply to the incoming and outgoing
traffic between this remote node and the Prestige and also to prevent certain packets from triggering calls.
You can specify up to 4 filter sets separated by comma, for example, 1, 5, 9, 12, in each filter field.
Note that spaces are accepted in this field. The Prestige has a prepackaged filter set, NetBIOS_WAN, that
blocks NetBIOS packets (call protocol filter = 1). Include this in the call filter sets if you want to prevent
NetBIOS packets from triggering calls to a remote node.
Figure 4-4 Menu 11.5 — Remote Node Filter (RFC 1483 or ENET Encapsulation)
Menu 11.5 - Remote Node Filter
Input Filter Sets:
protocol filters= 11, 12
device filters=
Output Filter Sets:
protocol filters=
device filters=
Enter here to CONFIRM or ESC to CANCEL: