Prestige 650HW ADSL Router
Hardware Installation and Initial Setup
2-7
Figure 2-5 P650HW with ISDN
2.6 Turning On Your Prestige
At this point, you should have connected the ADSL line, the Ethernet port and the power port to the
appropriate devices or lines. Push in the power button (located on the back of your Prestige) to turn on your
Prestige.
2.7 Configuring Your Prestige For Internet Access
Configure your Prestige for Internet access using:
Web configurator (refer to the
Read Me First
).
SMT (System Management Terminal). Access the SMT via LAN or WAN using Telnet.
2.7.1 Connect to your Prestige Using Telnet
The following procedure details how to telnet into your Prestige.
Step 1.
In Windows, click
Start
(usually in the bottom left corner),
Run
and then type “telnet
192.168.1.1” (the default IP address) and click
OK
.
Step 2.
Enter “1234” in the
Password
field.
Step 3.
After entering the password you will see the main menu.