Prestige 650HW ADSL Router
3-14
Internet Access
Table 3-4 Wireless LAN Setup Field Description
FIELD DESCRIPTION
EXMAPLE
frequency/channel depending on your particular region.
Possible choices are
CH01 2412MHz
,
CH02 2417MHz
,
CH03 2422MHzCH11
2462MHz CH04 2427MHz
,
CH05 2432MHz
,
CH06 2437MHz
,
CH07 2442MHz
,
CH08 2447MHz
,
CH09 2452MHz
,
CH10 2457MHz or CH11 2462MHz
.
2412MHz
RTS
Threshold
RTS(Request To Send) threshold (number of bytes) enables RTS/CTS
handshake. Data with its frame size larger than this value will perform the
RTS/CTS handshake. Setting this attribute to be larger than the maximum
MSDU (MAC Service Data Unit) size turns off the RTS/CTS handshake.
Setting this attribute to zero turns on the RTS/CTS handshake. Enter a value
between 0 and 2432.
2432
Fragment
Threshold
The threshold (number of bytes) for the fragmentation boundary for directed
messages. It is the maximum data fragment size that can be sent. Enter a
value between 256 and 2432.
2432
WEP
Encryption
WEP (Wired Equivalent Privacy) provides data encryption to prevent
unauthorized wireless stations from accessing data transmitted over the
wireless network.
Select
Disable
allows wireless clients to communicate with the access points
without any data encryption.
Select
64-bit WEP
or
128-bit WEP
to for the type of data encryption.
Disable
Default Key Enter the number of the key as an active key.
Key 1 to
Key 4
If you chose
64-bit WEP
in the
WEP Encryption
field, then enter any 5
characters (ASCII string) or 10 hexadecimal digits ("0-9", "A-F") preceded by
0x for each key (1-4).
If you chose
128-bit WEP
in the
WEP Encryption
field, then enter 13
characters (ASCII string) or 26 hexadecimal digits ("0-9", "A-F") preceded by
0x for each key (1-4).
There are four data encryption keys to secure your data from eavesdropping
by unauthorized wireless users. The values for the keys must be set up exactly
the same on the access points as they are on the wireless client computers.
Edit MAC
Address
Filter
To edit MAC address filtering table, press [SPACE BAR] to select
Yes
and
press [ENTER] to open menu 3.5.1.
No
When you have completed this menu, press [ENTER] at the prompt “Press [ENTER] to confirm or [ESC]
to cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.