Prestige 650HW ADSL Router
10-6
System Information and Diagnosis
10.3.2 Syslog and Accounting
The Prestige uses the UNIX syslog facility to log the CDR (Call Detail Record) and system messages to a
syslog server. Syslog and accounting can be configured in
Menu 24.3.2
—
System Maintenance
—
UNIX
Syslog
, as shown next.
Figure 10-7 Menu 24.3.2 — System Maintenance — Syslog and Accounting
You need to configure the UNIX syslog parameters described in the following table to activate syslog then
choose what you want to log.
Table 10-3 System Maintenance Menu — Syslog Parameters
PARAMETER DESCRIPTION
UNIX Syslog:
Active Use [SPACE BAR] and then [ENTER] to turn syslog on or off.
Syslog IP Address Type the IP address of your syslog server.
Log Facility Use [SPACE BAR] and then [ENTER] to select one of seven different local options.
The log facility lets you log the message in different server files. Refer to your UNIX
manual.
Types:
CDR Call Detail Record (CDR) logs all data phone line activity if set to
Yes
.
Packet Triggered The first 48 bytes or octets and protocol type of the triggering packet is sent to the
UNIX syslog server when this field is set to
Yes
.
Filter Log No filters are logged when this field is set to
No
. Filters with the individual filter Log
Filter field set to
Yes
are logged when this field is set to
Yes
.
Menu 24.3.2 - System Maintenance - UNIX Syslog
UNIX
Syslog:
Active= No
Syslog IP Address= ?
Log Facility= Local 1
Types:
CDR= No
Packet triggered= No
Filter Log= No
PPP Log= No
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.