Prestige 650HW ADSL Router
4-4
Remote
Node
Configuration
Figure 4-2 Menu 11.1 — Remote Node Profile
In
Menu 11.1 – Remote Node Profile
, fill in the fields as described in the following table.
Table 4-1 Remote Node Profile Menu Fields
FIELD DESCRIPTION
EXAMPLE
Rem Node Name
Type a unique, descriptive name of up to eight
characters for this node.
myISP
Active
Press [SPACE BAR] and then [ENTER] to select
Yes
to
activate or
No
to deactivate this node. Inactive nodes
are displayed with a minus sign “–“ in SMT menu 11.
Yes
Encapsulation
PPP
refers to RFC-2364 (PPP Encapsulation over ATM
Adaptation Layer 5).
If RFC-1483 (Multiprotocol Encapsulation over ATM
Adaptation Layer 5) of
ENET
ENCAP
are selected,
then the
Rem
Login
,
Rem
Password
,
My Login
,
My
Password
,
Edit PPP
Options and
Authen
fields are not
applicable (
N/A
).
PPP
Multiplexing
Press [SPACE BAR] and then [ENTER] to select the
method of multiplexing that your ISP uses, either
VC-
based
or
LLC-based
.
LLC-based
Service Name
When using
PPPoE
encapsulation, type the name of
your PPPoE service here.
N/A
Menu 11.1 - Remote Node Profile
Rem Node Name= myISP
Active= Yes
Encapsulation= PPP
Multiplexing= LLC-based
Service Name= N/A
Incoming:
Rem Login=
Rem Password= ********
Outgoing:
My Login=
My Password= ********
Authen= CHAP/PAP
Route= IP
Bridge= No
Edit IP/Bridge= No
Edit ATM Options= No
Telco Option:
Allocated Budget(min)= 0
Period (hr)= 0
Schedule Sets= N/A
Nailed-Up Connection= N/A
Session Options:
Edit Filter Sets= No
Idle Timeout (sec)= N/A
Press ENTER to Confirm or ESC to Cancel: