ZyXEL Communications P-861H-G1, User Manual, Page: 68 / 341

Prestige 861H Series User’s Guide
67 Chapter 4 LAN Setup
Figure 23 LAN Setup
The following table describes the fields in this screen.
Table 12 LAN Setup
LABEL DESCRIPTION
DHCP
DHCP If set to Server , your Prestige can assign IP addresses, an IP default gateway
and DNS servers to Windows 95, Windows NT and other systems that support
the DHCP client.
If set to
None , the DHCP server will be disabled.
If set to Relay , the Prestige acts as a surrogate DHCP server and relays DHCP
requests and responses between the remote server and the clients. Enter the IP
address of the actual, remote DHCP server in the Remote DHCP Server field in
this case.
Note: The DHCP requests are forwarded to the middleware
remote node of the Prestige.
When DHCP is used, the following items need to be set:
Client IP Pool
Starting Address
This field specifies the first of the contiguous addresses in the IP address pool.
Size of Client IP
Pool
This field specifies the size or count of the IP address pool.
Primary DNS Server Enter the IP addresses of the DNS servers. The DNS servers are passed to the
DHCP clients along with the IP address and the subnet mask.
Secondary DNS
Server
As above.