ZyXEL Communications P-861H-G1, User Manual, Page: 268 / 341

Prestige 861H Series User’s Guide
267 Chapter 32 VDSL Commands
32.6 VDSL Command Examples
You must type the main command first and then the sub-commands, as follows:
P861H> vdsl
vdsl> port snr
The rest of this chapter shows commonly used VDSL sub-command examples.
32.6.1 VDSL Port Command
Syntax:
vdsl port snr
vdsl port speed
vdsl port counter
vdsl port clrcntr
This command displays the information on your VDSL port SNR(Signal-to-Noise-Ratio),
speed and counter. You can also clear the port counter.
The examples are shown next
Figure 175
VDSL Port Speed Commands Example (Link Down)
P861H> vdsl port speed
VDSL status : DOWN
P861H>
Figure 176
VDSL Port Speed Commands Example (Link Up)
P861H> vdsl port speed
VDSL status : UP
Downstream line rate : 72384 kbps
Upstream line rate : 44928 kbps
Fast Downstream payload rate : 0 kpbs
Slow Downstream payload rate : 60864 kpbs
Fast Upstream payload rate : 0 kpbs
Slow Upstream payload rate : 37440 kpbs
Downstream delay : 3.8 ms
Uptream delay : 6.2 ms
Tx total power 5.9 dbm
vdsl>
The following table explains these parameters.