ZyXEL Communications P-861H-G1 User Manual Download Page 213

Page: 213 / 341

Prestige 861H Series User’s Guide

Chapter 23 System Information and Diagnosis

212

The following table describes the diagnostic tests available in menu 24.4 for and the
connections.

Table 65

Menu 24.4 System Maintenance Menu: Diagnostic

FIELD

DESCRIPTION

Reset xDSL

Re-initialize the xDSL link to the telephone company.

Ping Host

Ping the host to see if the links and TCP/IP protocol on both systems are working.

Reboot System

Reboot the Prestige.

Command Mode

Type the mode to test and diagnose your Prestige using specified commands.

Host IP Address

If you typed 12 to Ping Host, now type the address of the computer you want to

ping.

Summary of Contents for P-861H-G1






















































































































































































































































































































































Search results

Summary of Contents for P-861H-G1

Reviews:

ZyXEL Communications P-861H-G1, User Manual, Page: 213 / 341

Search results

Summary of Contents for P-861H-G1

Reviews: