manualshive.com logo in svg

ZyXEL Communications P-861H-G1, User Manual, Page: 34 / 341

Share
Download
ZyXEL Communications P-861H-G1 User Manual Download Page 34

Prestige 861H Series User’s Guide

33 

 Preface

The Quick Start Guide is designed to help you get up and running right away. They 
contain connection information and instructions on getting started.

• Web Configurator Online Help

Embedded web help for descriptions of individual screens and supplementary 
information.

• ZyXEL Glossary and Web Site

Please refer to www.zyxel.com for an online glossary of networking terms and additional 
support documentation.

User Guide Feedback 

Help us help you. E-mail all User Guide-related comments, questions or suggestions for 
improvement to [email protected] or send regular mail to The Technical Writing 
Team, ZyXEL Communications Corp., 6 Innovation Road II, Science-Based Industrial Park, 
Hsinchu, 300, Taiwan. Thank you.

Graphics Icons Key

Prestige

Computer

Notebook computer

Server

DSLAM

Firewall

Telephone

Switch

Router

Summary of Contents for P-861H-G1






















































































































































































































































































































































Reviews:

No comments