ZyXEL Communications P-861H-G1, User Manual, Page: 255 / 341

Prestige 861H Series User’s Guide
Chapter 30 System Commands 254
schedule
display
Displays the mail schedule.
schedule hour
[0-23]
Sets the hour to send logs.
schedule
minute [0-59]
Sets the minute to send the logs.
schedule
policy
[0:full/
1:hourly/
2:daily/
3:weekly/
4:none]
Sets the mail schedule policy.
schedule week
[0:sun/1:mon/
2:tue/3:wed/
4:thu/5:fri/
6:sat]
Sets the day of the week for sending weekly
logs.
server
[domainName/
IP]
Sets the domain name or IP address of the
mail server to which to send the logs.
subject [mail
subject]
Sets the log e-mail’s subject.
sendmail
save
Save the log settings from the buffer.
syslog active [0:no/
1:yes]
Enables/disables syslog logging.
display
Displays the syslog settings.
facility
[Local ID(1-
7)]
Specifies the file to which the device logs the
syslog messages.
server
[domainName/
IP]
Specifies the domain name or IP address of
the syslog server to which to send the
syslogs.
stdio [minute]
Sets or displays the management terminal
idle timeout value.
time [hour [min
[sec]]]
Sets or displays the system time.
trcdisp
trclog
trcpacket
view <filename>
Displays the specified text file.
wdog
switch [on|off]
Turns the watchdog firmware protection
feature on or off.
Table 75
sys Command Summary
MODULE COMMAND
SUB-
COMMAND
ARGUMENTS DESCRIPTION