ZyXEL Communications P-861H-G1, User Manual, Page: 139 / 341

Prestige 861H Series User’s Guide
Chapter 13 Introducing the SMT 138
13.3 Changing the System Password
Change the Prestige default password by following the steps shown next.
1
Enter 23 in the main menu to display Menu 23 - System Security .
2 Enter 1 to display Menu 23.1 - System Security - Change Password as shown next.
3
Type your existing system password in the Old Password field, for example “
1234
", and
press [ENTER] .
Figure 71
Menu 23 - System Password
Old Password= ?
New Password= ?
Retype to confirm= ?
Enter here to CONFIRM or ESC to CANCEL:
Menu 23.1 Change Password
4 Type your new system password in the New Password field (up to 30 characters), and
press
[ENTER]
.
5 Re-type your new system password in the Retype to confirm field for confirmation and
press
[ENTER]
.
Note: Note that as you type a password, the screen displays an “
*
” for each character
you type.
12 Static Routing Setup Use this menu to set up static routes.
15 NAT Setup Use this menu to specify inside servers when NAT is enabled.
21 Filter Set Configuration Use this menu to configure filters.
22 SNMP Configuration Use this menu to set up SNMP related parameters.
23 System Password Use this menu to change your password.
24 System Maintenance This menu provides system status, diagnostics, software upload,
etc.
25 IP Routing Policy Setup Use this menu to configure your IP routing policy.
26 Schedule Setup Use this menu to schedule outgoing calls.
99 Exit Use this to exit from SMT and return to a blank screen.
Table 38 Main Menu Summary
# MENU TITLE DESCRIPTION