ZyXEL Communications P-861H-G1, User Manual, Page: 264 / 341

Prestige 861H Series User’s Guide
263 Chapter 31 Ethernet, IP and WAN Commands
Figure 174 ip arp status
P861H> ip arp status
received 0 badtype 0 bogus addr 0 reqst in 0 replies 0 reqst out 1
cache hit 2 (40%), cache miss 3 (60%)
IP-addr Type Time Addr stat iface
192.168.1.255 10 Mb Ethernet 0 ff:ff:ff:ff:ff:ff 43 NULL
num of arp entries= 1
P861H>
31.4 WAN Commands
These are the commonly used commands that belong to the sys (system) group of commands.
Table 80 WAN Command Summary
MODULE COMMAND SUB-COMMAND ARGUMENTS DESCRIPTION
wan hwsar oam
<vpi> <vci>
<Option1>
<Option2>
<Type>
Use this command to perform an oam test where
<Option1>: 0(F4), 1(F5)
<Option2>: 0(Segment-To-
Segmemt), 1(End-To-End)
<Type>: 0(AIS), 1(RDI),
2(LoopBack)
loopback <option>
Use this command to perform a loopback test
where <option>: 0(off), 1(on)