ZyXEL Communications P-2612HW-F1 -, User Manual

Page: 225 / 547

Chapter 11 Phone Usage
P-2612HW Series User’s Guide
225
• Disconnect the first call and answer the second call.
Either press the flash key and press “1”, or just hang up the phone and then
answer the phone after it rings.
• Put the first call on hold and answer the second call.
Press the flash key and then “2”.
11.7.2.3 European Call Transfer
Do the following to transfer an incoming call (that you have answered) to another
phone.
1
Press the flash key to put the caller on hold.
2
When you hear the dial tone, dial “*98#” followed by the number to which you
want to transfer the call. to operate the Intercom.
3
After you hear the ring signal or the second party answers it, hang up the phone.
11.7.2.4 European Three-Way Conference
Use the following steps to make three-way conference calls.
1
When you are on the phone talking to someone, press the flash key to put the
caller on hold and get a dial tone.
2
Dial a phone number directly to make another call.
3
When the second call is answered, press the flash key and press “3” to create a
three-way conversation.
4
Hang up the phone to drop the connection.
5
If you want to separate the activated three-way conference into two individual
connections (one is on-line, the other is on hold), press the flash key and press
“2”.
11.7.3 USA Type Supplementary Services
This section describes how to use supplementary phone services with the USA
Type Call Service Mode. Commands for supplementary services are listed in the
table below.