Chapter 9 WAN
NBG6818 User’s Guide
79
Auto - IP C ha ng e
When the NBG6818 gets a WAN IP address or a DNS server IP address which is in the same subnet as the
LAN IP address 192.168.123.1, Auto-IP-Change allows the NBG6818 to change its LAN IP address to
10.0.0.1 automatically. If the NBG6818’s original LAN IP address is 10.0.0.1 and the WAN IP address is in
the same subnet, such as 10.0.0.3, the NBG6818 switches to use 192.168.123.1 as its LAN IP address.
Fig ure 41
Auto-IP-Change Example
Auto-IP-Change only works under the following conditions:
• The NBG6818 must be in
Sta nda rd Mo de
(see
Section 13.7 on page 137
for more information) for Auto-
IP-Change to become active.
• The NBG6818 is set to receive a dynamic WAN IP address.
9.4 Inte rne t C o nne c tio n Sc re e n
Use this screen to change your NBG6818’s Internet access settings. The screen varies depending on the
encapsulation method you select. Click
Se tting s
>
Inte rne t
>
Inte rne t C o nne c tio n
.
9.4.1 IPo E Enc a psula tio n
This screen displays when you select
IPo E
encapsulation.
Summary of Contents for ARMOR G1 NBG6818
